Coupling between high-frequency modes and a low-frequency mode: Theory and experiment

An analytical and experimental investigation into the response of a nonlinear continuous system with widely separated natural frequencies is presented. The system investigated is a thin, slightly curved, isotropic, flexible cantilever beam mounted vertically. In the experiments, for certain vertical harmonic base excitations, we observed that the response consisted of the first, third, and fourth modes. In these cases, the modulation frequency of the amplitudes and phases of the third and fourth modes was equal to the response frequency of the first mode. Subsequently, we developed an analytical model to explain the interactions between the widely separated modes observed in the experiments. We used a three-mode Galerkin projection of the partial-differential equation governing a thin, isotropic, inextensional beam and obtained a sixth-order nonautonomous system of equations by using an unconventional coordinate transformation. In the analytical model, we used experimentally determined damping coefficients. From this nonautonomous system, we obtained a first approximation of the response by using the method of averaging. The analytically predicted responses and bifurcation diagrams show good qualitative agreement with the experimental observations. The current study brings to light a new type of nonlinear motion not reported before in the literature and should be of relevance to many structural and mechanical systems. In this motion, a static response of a low-frequency mode interacts with the dynamic response of two high-frequency modes. This motion loses stability, resulting in oscillations of the low-frequency mode accompanied by a modulation of the amplitudes and phases of the high-frequency modes.     

On the extensional and flexural vibrations of rotating bars

The non-linear equations of motion of a slender bar rotating at constant angular velocity about a transverse axis are formulated. Under the assumption that a small perturbed motion occurs about an initially stressed equilibrium configuration, linearized equations of motion for the longitudinal and flexural deformations of a rotating bar carrying a tip mass are derived. Numerical computations for the natural frequencies of the lowest three modes of free vibration reveal that the values of the extensional frequencies increase monotonically, contrary to previously published results, as the angular velocity of rotation increases.     

Chemical immobilization of crosslinked polymeric ionic liquids on nitinol wires produces highly robust sorbent coatings for solid-phase microextraction

Super elastic nitinol (NiTi) wires were exploited as highly robust supports for three distinct crosslinked polymeric ionic liquid (PIL)-based coatings in solid-phase microextraction (SPME). The oxidation of NiTi wires in a boiling (30% w/w) H₂O₂ solution and subsequent derivatization in vinyltrimethoxysilane (VTMS) allowed for vinyl moieties to be appended to the surface of the support. UV-initiated on-fiber copolymerization of the vinyl-substituted NiTi support with monocationic ionic liquid (IL) monomers and dicationic IL crosslinkers produced a crosslinked PIL-based network that was covalently attached to the NiTi wire. This alteration alleviated receding of the coating from the support, which was observed for an analogous crosslinked PIL applied on unmodified NiTi wires. A series of demanding extraction conditions, including extreme pH, pre-exposure to pure organic solvents, and high temperatures, were applied to investigate the versatility and robustness of the fibers. Acceptable precision of the model analytes was obtained for all fibers under these conditions. Method validation by examining the relative recovery of a homologous group of phthalate esters (PAEs) was performed in drip-brewed coffee (maintained at 60 °C) by direct immersion SPME. Acceptable recoveries were obtained for most PAEs in the part-per-billion level, even in this exceedingly harsh and complex matrix.     

Multiscale expansions in discrete world

In this paper, we show the attainability of KdV equation from some types of nonlinear Schrödinger equation by using multiscale expansions discretely. The power of this manageable method is confirmed by applying it to two selected nonlinear Schrödinger evolution equations. This approach can also be applied to other nonlinear discrete evolution equations. All the computations have been made with Maple computer packet program.     

Synthesis and characterisation of low density porous polymers by reversible addition-fragmentation chain transfer (RAFT)

PolyHIPE foams with densities of 0.05–0.1 g cm^?3 have been prepared by the polymerisation of the continuous phase of high internal phase emulsions (HIPEs). The internal aqueous phase in HIPE occupies more than 74 % of the total volume, which leads to highly porous and open-cell morphologies. In this paper a method of preparing polyHIPE foams by using reversible addition-fragmentation chain transfer (RAFT) polymerisation has been investigated. Polystyrene-co-polymethyl methacrylate (PS-co-PMMA) has been studied and by using a variety of characterisation methods, it was possible to compare the polyHIPEs prepared by the conventional free radical polymerisation (FRP) to those by RAFT polymerisation. Scanning electron microscopy images have confirmed the presence of a cellular polyHIPE structure. PS-co-PMMA polyHIPEs made by RAFT have significantly narrower molecular weight distribution with values for the polydispersity index (PDI) for PS-co-PMMA between 1.46 and 2.08 compared to 4.68 observed by FRP. The effects of different concentrations of the RAFT agent on structure, glass transition temperature (T _g) and PDI of PS-co-PMMA polyHIPE foams are presented.     

Molecular QTAIM Topology Is Sensitive to Relativistic Corrections

The topology of the molecular electron density of benzene dithiol gold cluster complex Au₄−S−C₆H₄−S′−Au′₄ changed when relativistic corrections were made and the structure was close to a minimum of the Born–Oppenheimer energy surface. Specifically, new bond paths between hydrogen atoms on the benzene ring and gold atoms appeared, indicating that there is a favorable interaction between these atoms at the relativistic level. This is consistent with the observation that gold becomes a better electron acceptor when relativistic corrections are applied. In addition to relativistic effects, here, we establish the sensitivity of molecular topology to basis sets and convergence thresholds for geometry optimization.     

Stable range and almost stable range

We study some topics dealing with stable range and almost stable range. We give a simple proof of Bass’ Stable Range Theorem.     

MASS TRANSFER EXPERIMENTS ON SINGLE IRREGULAR-SHAPED PARTICLES

Mass transfer from irregular-shaped naphthalene particles (100-200 inn in size) was studitd in an electrodynamic balance. Charged particles were suspended in an electrostatic field directly in line with a calibrated air jet. Mass and size change histories were obtained under ambient conditions, and under steady- and pulsed-flow conditions. For natural convection, the time-averaged Sherwood number was similar to that for spheres. Forced-convection Sherwood number under steady-flow conditions was strongly dependent on particle shape and panicle Reynolds number, and was consistently higher than values predicted for spheres at comparable Reynolds numbers. This study validates the technique and indicates the shape effect on mass transfer form single particles.     

An immersed boundary method wall model for high‐Reynolds‐number channel flow over complex topography

High‐Reynolds‐number channel flows regularly encounter topographies composed of multiple length scales and that protrude into the boundary layer. Physically, the presence of immersed obstacles leads to increased velocity gradients, turbulence production, and manifestation of wakes. Considerable challenges are associated with numerically describing the presence of obstacles in channel flows. Common approaches include generation of a computational mesh that is uniquely designed for the flow and obstacle, the immersed boundary method, and terrain‐following coordinates. There are challenges and limitations associated with each of these techniques. Specification of boundary conditions representing the perimeter of solid obstacles is a primary challenge of the immersed boundary method. In this document, a simplistic canopy stress‐like wall model is used to impose boundary conditions. The model isolates aerodynamically relevant local frontal areas through evaluation of the gradient of the topographic height field. The gradient of the height field describes both the surface‐normal direction and the frontal area, making it ideal for detecting areas on which the flow impinges. The model is tested in numerical simulations of turbulent half‐channel flow over topographies with different obstacles affixed–right prisms, rectangular prisms, ellipsoidal mounds, and sinusoids. In all cases, the performance is strong relative to datasets presented in the literature. Results are finally presented for numerical simulation of flow over complex synthetic fractal‐like topography and a synthetic city. These results show interesting trends in how the turbulent multiscale flow field responds to multiscale topography. Copyright © 2012 John Wiley & Sons, Ltd.